Table of Contents
Advertisement
43 PS OPTION ERROR
44 IPDS OPTION ERROR
45 OPTION ERROR
46 NETWORK OPTION ERROR
50 ERROR CALL FOR SERVICE
51 ERROR CALL FOR SERVICE
52 ERROR CALL FOR SERVICE
53 ERROR CALL FOR SERVICE
54 ERROR CALL FOR SERVICE
55 ERROR CALL FOR SERVICE
164
InfoPrint 20: User's Guide -- Web Version
Action: Make sure the network interface card is properly installed and
restart the printer. See "Installing a Network Interface Card" on page 118. If
the message recurs, call for service. Remove the network interface card
from the printer if you want to print a printer configuration page or if you
want to print from the parallel port.
Meaning: The printer has detected a problem.
Action: Reinstall all SIMMs. See "Installing a SIMM" on page 114. If the
message recurs, call for service.
Meaning: The printer has detected a problem in the IPDS SIMM.
Action: Reinstall the IPDS SIMM. See "Installing a SIMM" on page 114. If
the message recurs, call for service.
Meaning: The printer has detected a problem with a SIMM.
Action: Reinstall all SIMMs. See "Installing a SIMM" on page 114. If the
message recurs, call for service.
Meaning: The printer has detected that two of the same network interface
cards have been installed.
Action: Remove one of the cards.
Meaning: The printer detected a fuser problem.
Action: Turn off the printer for fifteen minutes and then turn on the printer.
If the message recurs, call for service.
Meaning: A problem has occurred.
Action: Power off the printer, wait twenty seconds, then power on. If the
error recurs, call for service.
Meaning: The printer has detected an error in the print mechanism.
Action: Power off the printer, wait twenty seconds, then power on. If the
error recurs, call for service.
Meaning: The printer has detected a problem with the main motor.
Action: Power off the printer, wait twenty seconds, then power on. If the
error recurs, call for service.
Meaning: The printer has detected a problem in the duplex unit.
Action: Make sure the duplex unit is installed correctly. Call for service if
the problem continues.
Meaning: The printer has detected a problem with the fan.
Action: Power off the printer, wait twenty seconds, then power on. If the
error recurs, reinstall all SIMMs. See "Installing a SIMM" on page 114. If the
message recurs, call for service.
Advertisement
Table of Contents
