Table of Contents
Advertisement
|
|
|
|
|
|
|
|
|
|
158
InfoPrint 20: User's Guide -- Web Version
Action: None required.
PA1 REQUESTED
Meaning: A PA1 request was sent to the host over the coax interface.
Action: None required.
PA2 REQUESTED
Meaning: A PA2 request was sent to the host over the coax interface.
Action: None required.
PCL ETHERNET
Meaning: The printer is receiving PCL5e data through the Ethernet
interface.
Action: None required.
PCL PARALLEL
Meaning: The printer is receiving PCL5e data through the parallel interface.
Action: None required.
PCL TOKEN-RING
Meaning: The printer is receiving PCL5e data through the token-ring
interface.
Action: None required.
PJL PARALLEL
Meaning: The printer is receiving or sending PJL information through the
parallel interface.
Action: None required.
PJL TWINAX
Meaning: The printer is receiving or sending PJL information through the
twinax interface.
Action: None required.
PLEASE WAIT
Meaning: The printer is processing data and cannot immediately respond to
a request.
Action: Wait until the message clears. If the message remains and
processing on the host appears to have stopped, power off the printer, wait
ten seconds, and then power on the printer.
POWER SAVER ON
Meaning: The printer is in power-saving mode and has temporarily shut off
power to certain of its components. Power will be restored as soon as a job
is submitted.
Action: None required.
PS ETHERNET
Meaning: The printer is receiving PostScript data through the Ethernet
interface.
Action: None required.
PS PARALLEL
Meaning: The printer is receiving PostScript data through the parallel
interface.
Action: None required.
Advertisement
Table of Contents
