Loading The A4/Letter Paper Tray - IBM InfoPrint 20 User Manual

Loading the A4/Letter Paper Tray

Notes
1. To load the A3/Ledger (11 x 17) tray, see "Loading the A3/Ledger (11 x 17)
Paper Tray" on page 33.
2. Many applications allow you to specify the input tray you want to use. This
value will override any value set at the printer. If your application does not
let you pick an input tray, use the Paper Menu to select the tray.
To select a 500-sheet paper tray, set SOURCE to TRAY1, TRAY2, or
TRAY3 depending on the position of the tray (see "Selecting The Default
Input Tray" on page 48).
1. See "Selecting Paper and Other Printable Material" on page 25 and "A4/Letter
Tray Paper Specifications" on page 28 for information on media you can load.
2. Pull the tray out until it stops.
3. Gently lift the tray and then remove it from the printer. Place it on a flat
surface.
4. Remove the tray cover.
Chapter 4. Paper Handling
31