Table of Contents
Advertisement
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10 FUSER COVER OPEN
Meaning: The fuser cover is open.
Action: Close the cover. If the duplex unit is installed, make sure you did
not remove the entire fuser cover instead of just the duplex unit filler panel.
See "The Duplex Unit" on page 120.
11 LOAD paper_size IN tray
Meaning: The tray is out of paper, the tray contains the wrong size paper,
or the tray is loaded incorrectly. The message identifies the size of paper
(paper_size) and the tray (tray) that needs paper. If the message indicates
a tray you did not specify, either the original tray is out of paper and
automatic tray switching is enabled, or the original tray contains the
wrong-size paper. (Tray switching is automatic for paper size mismatches.)
See "Turning Tray Switching On or Off" on page 48.
Actions:
v If the tray is empty, refill it. The printer resumes printing on its own.
v If the tray contains the wrong size paper, you have two choices:
1. To use the current paper size, press the Continue key.
2. Load the correct paper size into the tray.
v If the tray contains the right size paper, make sure the paper is loaded
correctly. Check the paper guides. The AUTOSENSED PAPER section of
the printer configuration page shows what size paper the printer paper
size sensors have determined is in each tray. See "Printing the Printer
Configuration Page" on page 18.
v If you are printing a printer configuration page, make sure Letter or
A4-size paper is loaded in the default tray.
v If you specified a different tray, and you do not want to use the tray
specified in the message, you can do the following:
1. Reset the printer by doing one of the following:
a. Selecting RESET PRINTER from the Reset Menu (see "Reset
Menu" on page 67).
b. Powering the printer off and then powering it back on.
2. Load the correct paper size in the tray you want to use.
3. Resubmit the job.
v You can exclude trays from the tray switching search sequence. See the
descriptions for the Paper Menu Items TRAY1 PROT, TRAY2 PROT,
TRAY3 PROT, and AUXTRAYPROT in "Paper Menu" on page 68.
12 MANUALLY LOAD paper_size IN AUX
Meaning: The auxiliary tray requires paper. The message indicates the
required size (paper_size).
Action: Place another sheet of paper or other media in the auxiliary tray
and press the Continue key. If you receive this message and you do not
want to use the manual printing function, set MANUAL to OFF on the Paper
Menu or using your printer driver. See "Paper Menu" on page 68.
14 ADJUST PAPER GUIDES IN TRAY n
Meaning: Paper guides in the specified tray need adjusting.
Action: Adjust the paper guides. See "Loading the A4/Letter Paper Tray" on
page 31 or "Loading the A3/Ledger (11 x 17) Paper Tray" on page 33.
Appendix C. Printer Messages
161
Advertisement
Table of Contents
