Table of Contents
Advertisement
4. To use A3 or B4 size paper, pull out the paper tray extension.
5. Insert the paper into the auxiliary tray until it touches the stopper at the far end
6. If the paper length is less than 210 mm (8 in.), you can close the auxiliary tray
7. Use your print application or the Paper Menu to set AUXSIZE to match the
38
InfoPrint 20: User's Guide -- Web Version
of the tray. Place the print side of the paper with its face up.
during operation.
paper size you loaded in the auxiliary tray (see "Defining the Auxiliary Tray
Paper Size" on page 48). Values specified in print jobs override values you set
at the printer. To select the auxiliary tray as the default source tray, set
SOURCE to AUXTRAY in the Paper Menu (see "Selecting The Default Input
Tray" on page 48).
If you want to feed the paper manually into the auxiliary tray, use your print
application or the Paper Menu to set MANUAL to ON (see "Paper Menu" on
page 68).
Advertisement
Table of Contents
