Table of Contents
Advertisement
Use the Token Ring Menu to configure the token-ring attachment. The following
table describes the settings you can change from the Token Ring Menu. An asterisk
(*) next to a value in the table indicates the factory default. The Token Ring Menu
appears only if you have the token-ring attachment installed.
Notes:
1. To select a new value, press the Enter key when the value is displayed in the
2. If you are unfamiliar with using the operator panel to work with menus, please
Token Ring Menu
Item
PERSONALTY
AUTO*
PCL
PS
IPDS
PORT TMEOUT
nnn
TCP/IP
ON*
OFF
IP ADDRESS
nnn.nnn.nnn.nnn
SUBNET MASK
nnn.nnn.nnn.nnn
GATEWAY ADDRESS nnn.nnn.nnn.nnn
86
InfoPrint 20: User's Guide -- Web Version
message display area. An asterisk (*) appears next to the value in the message
display area, indicating that is now active.
read "Using the Operator Panel Keys" on page 16 and "Navigating Menus" on
page 17 before continuing.
Value
Specifies how the printer treats jobs it receives over the token-ring
attachment:
v AUTO—the printer examines the data stream and handles it
accordingly.
v PCL—the printer treats all data streams as PCL5e.
v PS—the printer treats all data streams as PostScript.
v IPDS—the printer treats all data streams as IPDS. This option
appears only if the IPDS SIMM is installed.
Specifies the number of seconds the printer waits for data before it
determines there is no more data to receive for the job. The printer
then checks other attachments for jobs, if other attachments are
installed. Valid values are 5 to 300. The default is 15 seconds.
Turns TCP/IP communications on or off.
v ON—enables TCP/IP communications.
v OFF—disables TCP/IP communications.
Note: If TCP/IP is OFF, the following menu items do not appear: IP
ADDRESS, SUBNET MASK, GATEWAY ADDRESS, BOOTP, and
DHCP.
Specifies the printer's IP address. Consult your network or LAN
administrator before changing this value. See "Chapter 9.
Configuring Printer Network Addresses" on page 141 for more
information.
Note: This menu item appears only when TCP/IP is ON.
Specifies the printer's subnet mask. Consult your network or LAN
administrator before changing this value. See "Chapter 9.
Configuring Printer Network Addresses" on page 141 for more
information.
Note: This menu item appears only when TCP/IP is ON.
Specifies the IP address of the default gateway. Consult your
network or LAN administrator before changing this value. See
"Chapter 9. Configuring Printer Network Addresses" on page 141 for
more information.
Note: This menu item appears only when TCP/IP is ON.
Description
Advertisement
Table of Contents
