Table of Contents
Advertisement
Config Menu Item
QUALITY
TONER LOW
Memory Configuration (Memconfig) Menu
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
74
InfoPrint 20: User's Guide -- Web Version
Value
NORMAL*
Specifies the print quality.
REFINE
v NORMAL—normal quality. Use for text documents.
ECONO
v REFINE—smooths edges. Use for documents that include
1200
v ECONO—reduces the amount of toner used in large black areas,
v 1200—emulates 1200 dpi resolution
Notes:
1. 1200 dpi emulation requires a minimum of 8MB of memory in
2. 1200 dpi emulation is not supported for IPDS. If you select 1200,
3. ECONO, REFINE, and 1200 may not appear on the operator
STOP*
Specifies whether or not to stop printing when the toner cartridge is
CONT
low on toner.
v STOP—stop printing.
v CONT—continue printing.
Use the Memory Configuration Menu to define whether or not the printer saves data
stream information when it switches data streams. The following table describes the
settings you can change from the Memory Configuration Menu. An asterisk (*) next
to a value in the table indicates the factory default.
Notes:
1. To select a new value, press the Enter key when the value is displayed in the
message display area. An asterisk (*) appears next to the value in the message
display area, indicating that it is now active.
2. If you do not have enough memory to support context saving, this menu will not
appear. 600 DPI requires at least 12MB; 1200 DPI emulation requires at least
24MB. Larger paper sizes, page protection, and duplex printing may further
increase your memory requirements (see "Memory Requirements" on page 4).
To find out how much memory you have installed, print a printer configuration
page. See "Printing the Printer Configuration Page" on page 18 for more
information.
3. If you are unfamiliar with using the operator panel to work with menus, please
read "Using the Operator Panel Keys" on page 16 and "Navigating Menus" on
page 17 before continuing.
Description
images, shading, and complex graphics.
which saves toner.
simplex mode and 12MB in duplex mode. See "Memory
Requirements" on page 4.
the printer will still print IPDS jobs at a lower resolution;
however, for performance reasons, IBM recommends that you
use your driver or the operator panel to explicitly set QUALITY
to NORMAL, REFINE, or ECONO (if available) for IPDS. (Driver
settings override menu settings.)
panel if you use only a parallel attachment and if the 2000-Sheet
Input Drawer is not installed. If they do not appear on the panel
and you want to use them, please contact IBM technical support
(see "Technical Support" on page 3).
Advertisement
Table of Contents
