Table of Contents
Advertisement
|
|
|
6. Press the Enter key to print the configuration page. (It takes about a minute.)
The following figure shows a sample printer configuration page.
The configuration page lists:
v Menus—All of the menu settings currently active for your printer. Note that
the list of menus you see is determined by the options you have installed; for
example, you see the Ethernet Menu only when you have the Ethernet
attachment installed. Also note that the configuration page displays the
menus and options in the order they appear on the operator panel; this
allows you to use the configuration page as a menu map.
For a description of all available menus, see "Chapter 6. Operator Panel
Menus" on page 65.
v Installed Options—The options and memory you have installed.
Important: IBM recommends doing the following whenever you install a
feature:
– Print the printer configuration page. Then look under Installed Options to
make sure the printer recognizes the option and the installation was
successful.
– Update your printer driver to indicate the new feature is available. (This
includes features such as new trays and extra memory; you do not need
to indicate new network interface cards.)
v Autosensed Paper— A list of the paper sizes that the printer sensors have
determined is in each tray. Note that the auxiliary tray does not have a
paper-size sensor.
v Printer Details
– Type—The machine type (4320).
– Serial Number—The machine serial number.
– Page Count—The number of pages printed on the printer.
Chapter 3. Using the Operator Panel
19
Advertisement
Table of Contents
