4. Position the hard drive with the four screws facing the four matching holes on
5. Push the hard drive firmly into the card and slide it down toward the connector
6. Reinstall the side cover. Follow the procedure "Reinstalling the Side Cover".
Reinstalling the Side Cover
Use the following procedure to reinstall the side cover:
1. Insert the hooks (1) at the bottom of the side cover into the holes (2) at the
2. Guide the tabs (3) into the slots (4) in the top cover and slide the side cover
116
InfoPrint 20: User's Guide -- Web Version
the controller card.
at the bottom of the controller card. The pins on the hard drive should be firmly
seated in the connector slots.
bottom of the printer frame.
toward the front of the printer.