Table of Contents
Advertisement
Twinax Setup Menu
Item
PORT TMEOUT
nnn
Coax DSC/DSE Menu
Use the Coax DSC/DSE Menu to define how the printer handles DSC/DSE data
over the coax attachment. The following table describes the settings you can
change from the Coax DSC/DSE Menu. The options you specify apply only to
DSC/DSE mode. An asterisk (*) next to a value in the table indicates the factory
default. The Coax DSC/DSE Menu appears only if you have the coax network
interface card installed.
Notes:
1. To select a new value, press the Enter key when the value is displayed in the
2. For more information about configuring the coax attachment, see IBM Network
3. If you are unfamiliar with using the operator panel to work with menus, please
Coax DSC/DSE Menu
Item
PRINT IMAGE
ON*
OFF
98
InfoPrint 20: User's Guide -- Web Version
Value
Specifies the number of seconds the printer waits for data before it
determines there is no more data to receive for the job. The printer
then checks other installed attachments, and will switch to
attachments with jobs waiting. Valid values are 0 to 255. The default
is 90 seconds.
Notes:
1. Setting PORT TMEOUT to 0 dedicates the printer to the twinax
port only. If you set PORT TMEOUT to 0, and you print a
non-IPDS job, you will not be able to print IPDS jobs until you
power off and then power on the printer.
2. Setting PORT TMEOUT too low can cause timeouts to occur
during normal pauses in the data stream, which, in turn, can
cause jobs to print again. If this problem occurs, set PORT
TMEOUT to a higher value. IBM recommends that you do not
set PORT TMEOUT to a value less than 30.
message display area. An asterisk (*) appears next to the value in the message
display area, indicating that it is now active.
Printers: Twinax/Coax Configuration Guide.
read "Using the Operator Panel Keys" on page 16 and "Navigating Menus" on
page 17 before continuing.
Value
Selects printing options in non-SCS mode.
v ON
– True Screen image in Local Copy
– True Screen image in Non-SCS print
– Unformatted print in Local Copy
– Unformatted print in Non-SCS print
v OFF
– Null line suppression in Local Copy
– Null line suppression in Non-SCS print
– Formatted print in Local Copy
– Formatted print in Non-SCS print
Description
Description
Advertisement
Table of Contents
