Table of Contents
Advertisement
6. Remove the used toner cartridge.
Note: Keep the toner cartridge level to avoid spilling toner. To use the IBM
Printer Supplies Return Program, you can use the box containing the
new toner cartridge to return the old toner cartridge to IBM for recycling.
Follow the instructions on the brochure included with the new toner
cartridge.
7. Remove the new toner cartridge from its foil wrapper.
Attention: Do not expose the new cartridge to direct sunlight. Do not leave the
cartridge exposed outside the printer or the foil wrapper for more than five
minutes.
8. Grip the cartridge at each end and gently rock it from side to side a few times
to evenly distribute the toner.
9. Place the cartridge on a flat surface and locate the yellow tape at the end of
the cartridge. Pull the end of the tape straight out to remove the toner seal.
Note: After you remove the seal, do not shake the cartridge.
10. Grip the toner cartridge as shown. Slide the cartridge into the printer guide
channels. To make sure the toner cartridge is secure, gently press both ends
Chapter 7. Maintaining the Printer
103
Advertisement
Table of Contents
