Table of Contents
Advertisement
FLUSHING...
FORMATTING
F/W xxxxxxx
I/O INITIALIZING
- IGNORE DISK/+ FORMAT DISK
IPDS COAX
IPDS ETHERNET
IPDS TOKEN-RING
IPDS TWINAX
JOB QUEUED
KEY NOT VALID
156
InfoPrint 20: User's Guide -- Web Version
Meaning: The printer is canceling a PCL5e or PostScript job.
Action: None required.
Meaning: The printer is formatting the hard drive.
Action: None required.
Meaning: Firmware error (xxxxxxx can be any alphanumeric value).
Action: Power the printer off, wait ten seconds, and power the printer back
on. If problems persist, call for technical support.
Note: When firmware errors occur, the printer might also print an error
page. If the printer does print an error page, save it so you can tell
technical support.
Meaning: The network interface card is initializing.
Action: Normally none. If the message remains on the display and nothing
prints, and you have an Ethernet or token-ring card, make sure your LAN
cable is connected and the network interface card is seated.
Meaning: You are powering up with an unformatted hard drive, or you
selected the FORMAT DISK action on the Test Menu.
Action: Press the Value key to format the hard drive. Press the Shift and
Value keys simultaneously to continue as if there were no hard drive
installed.
Meaning: The printer is receiving IPDS data through the coax interface.
Action: None required.
Meaning: The printer is receiving IPDS data through the Ethernet interface.
Action: None required.
Meaning: The printer is receiving IPDS data through the token-ring
interface.
Action: None required.
Meaning: The printer is receiving IPDS data through the twinax interface.
Action: None required.
Meaning: An informational page is queued for printing.
Action: If the online indicator is off, press the Online key.
Meaning: You pressed a key that is not valid.
Action: Press another key. In some instances, you may need to press the
Online key to use other keys such as the Menu key.
Advertisement
Table of Contents
