Changing The Administrative Login Settings - Ruckus Wireless ZoneFlex 7982 User Manual

Figure 59. Viewing connected devices

Changing the Administrative Login Settings

The default user name is super and the default password is sp-admin. To prevent
unauthorized users from logging in to the Web interface using these default admin-
istrator login settings, Ruckus Wireless recommends that you change the default Web
interface password immediately after your first login.
To change the default administrator login settings
1. Log into the Web interface.
2. Go to Configuration > Device.
3. Under Service Provider Login, change the default administrator login settings.
• In Username, type a new user name that you will use to log in to the Web
interface. The default user name is super.
• In Password, type a new password to replace the default password sp-admin.
The password must consist of six to 32 alphanumeric characters only.
• In Password Confirmation, retype the new password.
4. Click Update Settings. The message Your parameters were saved appears.
You have completed changing the default login settings. The next time you log in to
the Web interface, make sure you use these updated login settings.
Managing the Access Point

Changing the Administrative Login Settings

111