Ruckus Wireless ZoneFlex 7982 User Manual page 77

Figure 38. L2TP Connection
To configure L2TP tunneling
1. Go to Configuration > Internet.
2. Under L2TP Connection, click Enable.
3. In L2TP Network Server IP Address, type the IP address of the L2TP network
server (LNS) to which the device will connect.
4. In L2TP Network Server Password, type the L2TP server password.
5. If your network requires PPP authentication, configure the following fields under
L2TP/PPP Authentication:
• Username: Type your appropriate PPP user name.
• Password: Type the password appropriate to the account.
• L2TP Tunnel Untag VLAN ID: Enter the Untag VLAN ID for the L2TP tunnel.
6. In Close WLAN When Tunnel Fail, select Enable if you want to disable the WLAN
when the tunnel connection is lost. This prevents clients from remaining seemingly
connected to the WLAN but without Internet connectivity.
7. Click Update Settings to save your settings.
Configuring the Access Point
Configuring Internet Settings
69