Viewing Current Wireless Settings - Ruckus Wireless ZoneFlex 7982 User Manual

Viewing Current Wireless Settings

If you want to view the current common wireless settings that the AP is using, go to
the Status > Wireless page (on dual band APs, go to Status > 2.4G or Status > 5G).
Table 38 lists the descriptions of each common wireless setting.
Table 38. Common Wireless settings
Setting
Wireless Mode
Channel
Channel Width
Country Code
AeroScout RFID tag detection
AeroScout Engine
communication daemon

Viewing Current Wireless Settings

Description
Shows the wireless mode that the AP is currently
using. Possible values include:
• Auto Select: (For 802.11b/g APs only) Allows
both 802.11g- and 802.11b-compliant devices
to connect to the network. This is the default
setting.
• 2.4GHz 54 Mbps: Allows 11g devices only.
• 2.4GHz 11 Mbps: Allows 11b devices only.
• 11ng: Operates with 802.11n, 802.11g and
802.11b devices in the 2.4Ghz spectrum only.
• 11na: Operates with 802.11n and 802.11a
devices in the 5GHz spectrum only.
Shows the wireless channel that the AP is currently
using. If you set the wireless channel to
SmartSelect, this field will show the value Channel
# [SmartSelect].
11n devices only. Displays whether the channel
width is set to 20MHz or 40MHz.
Shows the country code that the AP has been set
to use.
CAUTION: Verify that the AP is using the correct
country code to make sure it uses only the allowed
radio channels in your region. Selecting the
incorrect country code may result in violation of
application laws.
Shows Enabled if you enabled AeroScout RFID
tag detection. The default setting is Disabled.
Shows Up if the communication agent on the AP
is able to relay location data from AeroScout Tags
to the AeroScout Engine.
If the communication agent is unable to relay data
or AeroScout tag detection is disabled, this field
will show Down.
Managing the Access Point
109