Ruckus Wireless ZoneFlex 7982 User Manual page 122

Managing the Access Point
Enabling Other Management Access Options
2. Review the access options listed in
Table 39. Management Access Options
Option Description
Telnet access By default, this option is disabled (inactive).
Telnet port This field lists the default Telnet port of 23 — only if Telnet
is active. You can manually change this port number, if
required.
SSH access By default, this option is enabled (active).
SSH port This field lists the default SSH port of 22—only if SSH is
active. You can manually change this port number if
required.
HTTP access This option is disabled by default.
HTTP port This field lists the default HTTP port of 80, if HTTP has been
activated. You can manually change this port number if
required.
HTTPS access By default this option is enabled. This connection mode
requires a security certificate, a copy of which has been pre-
installed in the device.
HTTPS port This field lists the default HTTPS port of 443—only if HTTPS
has been activated. You can manually change this port
number if required.
Certification This notes whether the security certificate linked to the
Verification HTTPS settings has been passed or not.
Auto-provisioning This setting is disabled by default, and should only be
enabled if using FlexMaster server for AP management.
3. If you want to use TR-069 or SNMP to manage the AP, configure the settings listed
in Table 40.
Table 40. TR-069 and SNMP Management Options
Option
Auto
SNMP only
FlexMaster only
DHCP Discovery
Table 39, and then make changes as needed.
Description
Enables the ZoneFlex device to be managed by
either SNMP server, Ruckus Wireless
ZoneDirector, or Ruckus Wireless FlexMaster.
Only allow SNMP management
Only allow FlexMaster management
URL of server providing DHCP
114