Check The Leds; Check The Tr069 Status (Flexmaster Management Only) - Ruckus Wireless ZoneFlex 7982 User Manual

• Windows XP: In the system tray, right-click the
tion) icon, and then click View Available Wireless Networks.
• Windows 7: Left click the
3. In the list of available wireless networks, click the network with the same SSID as
you configured in "Configure Wireless # Settings"
set the SSID to Ruckus Wireless AP, click the wireless network named Ruckus
Wireless AP.
4. Click Connect.
Your wireless client connects to the wireless network. After the wireless client connects
to the wireless network successfully, the wireless client icon in the system tray changes
to (on Windows XP) or

Check the LEDs

Perform a spot-check using the LEDs to verify that the Access Point is operating
normally. Refer to the following sections for information on how to check the LEDs on
each ZoneFlex AP model.
Single Radio APs (ZoneFlex 2942/7341/7343/7321/
7025)
If the single radio Access Point is operating normally and your wireless client was able
to associate with it:
The WLAN LED is green.
■
If you do not have Ruckus Wireless ZoneDirector on the network, the DIR LED is
■
off. This indicates that the Access Point is operating in standalone mode. If there
is a ZoneDirector device on the network, the DIR LED is green.
Dual Radio APs (ZoneFlex 7363/7962/7982)
If the dual radio Access Point is operating normally and your wireless client was able
to associate with it:
The 2.4G or 5G LED is green.
■
If you do not have Ruckus Wireless ZoneDirector on the network, the DIR LED is
■
off. This indicates that the Access Point is operating in standalone mode. If there
is a ZoneDirector device on the network, the DIR LED is green.
Check the TR069 Status (FlexMaster Management
Only)
If you configured the Access Point to report to a FlexMaster server on the network,
make sure you verify that it can successfully communicate with the FlexMaster server.
You can do this by checking the TR069 status on the Access Point's Web interface.
Step 2: Verify Access Point Operation
icon.
on
(on Windows 7).
Installing the Access Point
(Wireless Network Connec-
page 47. For example, if you
51