Changing The Administrative Login Settings - Ruckus Wireless ZoneFlex 7762-S User Manual
802.11g access point; 802.11g outdoor access point; 802.11n access point; dual band 802.11n access point; dual band 802.11n outdoor access point; dual band 802.11n outdoor sector access point; 2.4ghz 802.11n smart wi-fi access point; dual band 802.11n sma
Hide thumbs
Also See for ZoneFlex 7762-S:
- Installation manual (70 pages) ,
- User manual (149 pages) ,
- Datasheet (5 pages)
Table of Contents
Advertisement
Figure 45.
Viewing connected devices
Changing the Administrative Login Settings
The default user name is super and the default password is sp-admin. To prevent
unauthorized users from logging in to the Web interface using these default admin-
istrator login settings, Ruckus Wireless recommends that you change the default Web
interface password immediately after your first login.
To change the default administrator login settings
1. Log into the Web interface.
2. Go to Configuration > Device. The Device page appears.
3. Under Service Provider Login, change the default administrator login settings.
•
In Username, type a new user name that you will use to log in to the Web
interface. The default user name is super.
•
In Password, type a new password to replace the default password sp-admin.
The password must consist of six to 32 alphanumeric characters only.
•
In Password Confirmation, retype the new password.
4. Click Update Settings. The message Your parameters were saved appears.
You have completed changing the default login settings. The next time you log in to
the Web interface, make sure you use these updated login settings.
Managing the Access Point
Changing the Administrative Login Settings
85
Hide quick links:
Advertisement
Table of Contents
