Ruckus Wireless ZoneFlex 7982 User Manual page 108

Configuring the Access Point
Configuring Hotspot Service
NAS ID
WISPr Location ID
WISPr Location Name
Location Description
Accounting Update Interval
Interim Redirect Interval
Maximum Session Time
Grace Period
UAM Port with HTTP
UAM Port with HTTPS
RADIUS Disconnect Port
Swap Input and Output
Counters
Encode User Password
Specify the Network Access Server identifier of this
device. The NAS-ID attribute is sent in RADIUS
access and accounting request messages. It can
also be used as location identification when NAS-
IP-Address cannot be used for this purpose.
Specify the Hotspot location identifier. This value
is provided in the RADIUS access and accounting
requests. It is recommended that the value is in the
form of "isocc=<ISO_Country_Code>,
cc=<E.164_Country_Code>,ac=<E.164_Ar
ea_Code>,network=<SSID/ZONE>".
Specify the hotspot location and operator's name.
This value is provided in the RADIUS access and
accounting requests. It is recommended that the
value is in the form of
"<HOTSPOT_OPERATOR_NAME>,<Location".
Specify the description of location. This value is
provided in the HTTP redirection.
Specify the interval for RADIUS accouting requests.
Specify the interval after which users will be
redirected to the login URL.
Enter the maximum session time in minutes.
Specify the maximum time that a user may
disconnect from the Hotspot service and return
without the need to login again.
TCP port to bind to for authenticating clients using
HTTP.
TCP port to bind to for authenticating clients using
HTTPS.
UDP port to listen to for accepting RADIUS
disconnect requests.
Swap the value of input counters (packets, octets
and giga words) and output counters in RADIUS
accounting requests. This option is mainly for
backward compatibility with existing Chillispot
deployments.
Encode user password with challenge string, if
UAM secret is not specified; otherwise, encode
user password with both challenge string and UAM
secret.
100