Table of Contents
Advertisement
Ruckus Wireless ZoneFlex 2925/2942 User Guide | After the Installation (Post-Installation Setup)
Changing the Administrator Login Settings
To replace the current Hotspot Operator login settings, follow these steps:
1
After logging in to the Web User interface, click Device under Configuration.
The Configure::Device workspace appears.
2
Review the options. If, you log in as an Operator or Service Provider user, you'll see
two sets—Home and Service Provider login fields.
• The Service Provider user login settings (which you use as "Operator") initially have
"super" as the username, and "sp-admin" as the password.
• You can safely ignore the Home settings.
3
Change the Service Provider user name and password (either or both) in the appropri-
ate text fields.
• User names and Passwords must be between 6 and 32 characters in length, and be
comprised of letters and numbers only.
• Both user name and password entries are case-sensitive.
• Do not use word spaces.
4
Be sure to write down the new user name or password if you make changes.
5
When you're finished, click Update Settings.
A confirmation message appears at the top of the workspace.
21
FIGURE 3-3
Advertisement
Table of Contents
