Changing The Administrative Login Settings - Ruckus Wireless ZoneFlex T301s User Manual

Changing the Administrative Login Settings

The default user name is super and the default password is sp-admin. To prevent
unauthorized users from logging into the Web interface using these default admin-
istrator login settings, Ruckus Wireless recommends that you change the default
Web interface password immediately after your first login.
1 Log into the Web interface.
2 Go to Configuration > Device.
Figure 52. The Configuration > Device page
3 Under Service Provider Login, change the default administrator login settings:
• In Username, type a new user name that you will use to log in to the Web
interface. The default user name is super.
• When you are changing a password, type the existing password in Current
Password.
• In New Password, type a new password to replace the existing password.
The password must consist of six to 32 alphanumeric characters only.
• In Confirm New Password, retype the new password.
4 Click Update Settings. The message Your parameters were saved appears.
You have completed changing the default login settings. The next time you log in to
the Web interface, make sure you use these updated login settings.
Ruckus Wireless Outdoor AP 100.1.0 User Guide, 800-70863-001 Rev A
Changing the Administrative Login Settings
125