Rate Limiting - Ruckus Wireless ZoneFlex 7982 User Manual

Configuring the Access Point
Configuring Wireless Settings
Data Beacon Rate
RTS/CTS Threshold
5. Click Update Settings to save and apply the changes. A confirmation message
appears at the top of the page.
You have completed configuring the threshold options. To reopen the previous page,
click the Go back to Wireless Configuration link.
Figure 47. Threshold settings

Rate Limiting

Rate Limiting allows you to cap the per client data transfer rates for a specific WLAN.
To enable per station rate limits
1. Go to Configuration > Wireless.
(The default value is 1.) The value indicates the interval
of the Delivery Traffic Indication Message (DTIM). This
is a countdown field that the device uses to inform its
clients of the next window for listening to broadcast or
multicast messages.
(The default value is 65535.) This option determines at
what packet length the RTS/CTS function is triggered.
A lower threshold may be necessary in an environment
with excessive signal noise or hidden nodes, but may
result in some performance degradation.
88