Changing The Administrative Login Settings - Ruckus Wireless ZoneFlex 2741 User Manual

Managing the Access Point

Changing the Administrative Login Settings

Changing the Administrative Login Settings

The default user name is super and the default password is sp-admin. To prevent
unauthorized users from logging in to the Web interface using these default admin-
istrator login settings, Ruckus Wireless recommends that you change the default Web
interface password immediately after your first login.
To change the default administrator login settings
1. Log in to the Web interface.
2. Go to Configuration > Device. The Device page appears.
3. Under Service Provider Login, change the default administrator login settings.
• In Username, type a new user name that you will use to log in to the Web
interface. The default user name is super.
In Current Password, type an existing password. The default password is sp-
•
admin.
• In New Password, type a new password to replace the existing password. The
password must consist of six to 32 alphanumeric characters only.
• In Confirm New Password, retype the new password.
4. Click Update Settings. The message Your parameters were saved appears.
You have completed changing the default login settings. The next time you log in to
the Web interface, make sure you use these updated login settings.
Figure 42. The Configuration > Device page
84