The external antenna connectors are for indoor use only. Do not connect
CAUTION:
them to outdoor antennas.
Table 18. ZoneFlex 2942 rear panel elements
Number Item Name
1
Power
2
Lock Hasp
3
External RP-SMA
Connector
4
LAN Ports
5
OPTIONAL Button Not active in this model at this time.
6
SOFT RESET
Button
Table 19. Behavior of Ethernet port LEDs on ZoneFlex 2942
LEDs
Off
Amber + Green
Amber
Green
Introducing the ZoneFlex Access Point
Getting to Know the Access Point Features
Description
Connect the power adapter to this socket. (Input
110-240V AC, Output 12V 1.0A DC). Power can also
be supplied via 10/100 PoE port.
The lock hasp works with a cable or Ruckus mounts.
The recommended lock type is Masterlock 120 series
(D, T, Q, KAD types).
External antenna connector
Two RJ-45 ports, supporting 10/100 PoE (Power over
Ethernet) and 10/100Mbps connections.
Each Ethernet port has two LEDs, which indicate the
type of device that is connected to the port.
Used to reset the AP. This is a normal reset and does
not reset the AP back to factory defaults.
Description
Not connected
Connected to 10Mbps device
Connected to 100Mbps device
Connected to 1000Mbps device
27