Ruckus Wireless ZoneFlex 7982 User Manual page 123

Table 40. TR-069 and SNMP Management Options
Option
FlexMaster Server URL
Digest-authentication
Username/Digest-
authentication password
Periodic FlexMaster Inform
Interval
4. Click Update Settings to save your changes. A confirmation message appears at
the top of the page.
You have completed configuring the management access options.
NOTE: Remember to open any relevant firewall ports between the AP and the
firmware upgrade/management server. For example, if HTTPS is used for firmware
upgrades, open TCP port 443 on the firewall to allow connections through port 443.
If FlexMaster server is used, open TCP ports 80 and 443 for HTTP/HTTPS communi-
cations, and TCP port 8082 for AP wake-up commands.
Enabling Other Management Access Options
Description
URL of the FlexMaster server
This information is automatically generated by the
AP and used for authentication with FlexMaster.
Change this value only if you want the AP to
connect to another access control server (ACS).
Interval at which the device should attempt to
contact FlexMaster
Managing the Access Point
115