Ruckus Wireless ZoneFlex 7982 User Manual page 16

Introducing the ZoneFlex Access Point
Getting to Know the Access Point Features
Table 6. ZoneFlex 7962 side panel elements
Number LED/Button Name Description
2 DIR LED
3 2.4G LED (WLAN)
4 5G LED (WLAN)
• Off: The Access Point is not being managed by
ZoneDirector (standalone mode).
• Green: The Access Point is being managed by
ZoneDirector.
• Slow flashing green (one flash every two seconds):
The Access Point is being managed by
ZoneDirector, but is currently unable to
communicate with ZoneDirector.
• Fast flashing green (two flashes every second):
The Access Point is being managed by
ZoneDirector and is currently receiving
configuration settings (provisioning) or a firmware
update.
• Off: The WLAN service is down.
• Green: The WLAN service is up, at least one client
is associated, and signal quality is good (RSSI >=
15).
• Flashing green (two flashes every second): The
WLAN service is up but no clients are associated.
• Amber: The WLAN service is up, at least one client
is associated, but signal quality is poor (RSSI < 15).
• Off: The WLAN service is down.
• Green: The WLAN service is up, at least one client
is associated (standalone), or at least one
downlink MAP is connected (RAP), or uplink RAP
is connected (MAP), and signal quality is good
(RSSI >= 15).
• Fast flashing green (two flashes every second):
The WLAN service is up but no clients are
associated (standalone), no downlink MAPs are
connected (RAP), or no uplink RAP is connected
(MAP).
• Amber: The WLAN service is up, at least one
wireless client is associated (standalone), or at
least one downlink MAP is connected (RAP), or
uplink RAP is connected (MAP), but signal quality
is poor (RSSI < 15).
8