Ruckus Wireless ZoneFlex 7982 User Manual page 88

Configuring the Access Point
Configuring Wireless Settings
Hotspot Service Select a Hotspot configuration from the list to enable
Hotspot service on this WLAN, if you have configured it
from the Configuration > Hotspot page. See
Hotspot Service"
Local Subnet This option appears if you have selected Local Subnet NAT
and Route to WAN under Packet Forwarding, and allows
you to choose which subnet this WLAN's traffic will be part
of. You must have previously configured a subnet from the
Configuration > Local Subnets page before it becomes
available here.
Access VLAN Enter a VLAN ID to segment all traffic arriving from this
WLAN to a specified VLAN. Default is 1.
Dynamic VLAN This setting is available only with WPA encryption and
802.1X authentication. Dynamic VLAN allows the dynamic
assignment of VLANs to clients based on RADIUS
attributes. Enable this option only if your RADIUS server is
configured to segment clients using dynamic VLAN.
DHCP Option 82 When this option is enabled on an SSID, additional
information will be encapsulated in DHCP option 82 and
inserted into DHCP request packets. Current format of
option 82 is:
Circuit ID sub-option:
WLAN:<IFNAME>:<VLAN>:<SSID>:<MODEL>:
<HOSTNAME>:<DEVMAC>
This option supports the ability for a service provider to
allocate IP addresses intelligently by considering
information on the origin of the IP allocation request.
Client Fingerprinting When this option is enabled, the AP attempts to identify
client devices by their operating system, device type and
host name, if available.
Encryption Method By default, all data exchanges on your wireless network are
not encrypted, but you can select an encryption method in
this option, and use the extra workspace features that
appear to fine-tune the encryption settings.
Ruckus Wireless strongly recommends using WPA as the
encryption method as WEP has been proven to be easily
circumvented.
For more information, see either
or
4. When you are finished, click Update Settings to save and apply the changes. A
confirmation message appears at the top of this page.
on page
"Using WPA" on page 82.
"Configuring
97.
"Using WEP" on page 81
80