Upgrading Manually Via The Web; Upgrading Manually Via Local File; Scheduling Automatic Upgrades - Ruckus Wireless ZoneFlex 7982 User Manual

Do not change any of the Image Control File, Username, or Password
CAUTION:
entries.
3. Click Perform Upgrade. A status bar appears during the upgrade process.
4. After the upgrade is completed, you must manually reboot the AP.

Upgrading Manually via the Web

1. In the Upgrade Method options, click Web.
2. If instructed to choose a different URL than the default value, click the Web
Options URL field, and then type the URL of the download Web site. Remember
to start the URL with "http://".
3. Click Perform Upgrade. A status bar appears during the upgrade process.
4. After the upgrade is completed, you must manually reboot the AP.

Upgrading Manually via Local File

If you have already saved a firmware file on your local computer, you can upgrade
directly using the Web interface.
1. In the Upgrade Method options, choose Local.
2. Click the Browse button and locate the file on your local computer.
3. Select the file and click OK.
4. Click Perform Upgrade. A status bar appears during the upgrade process.
5. After the upgrade is completed, you must manually reboot the AP.

Scheduling Automatic Upgrades

1. In the Upgrade Method options, click the button for your preferred choice.
2. Enter the appropriate information in the Host name field or IP address field.
Do not change any of the Image Control File, Username, or Password
CAUTION:
entries.
3. Verify that the Auto Upgrade option is set to Enabled.
4. Toggle the Interval to Check for Software Upgrade drop-down list to select your
preferred interval.
Managing the Access Point
Upgrading the Firmware
121