Table of Contents
Advertisement
TRENDnet User's Guide
6. Using another Ethernet cable, connect one end to the DATA IN port of the injector.
7. Connect the other end of the Ethernet cable to the LAN port of your network.
8. Plug the power cord into the injector. Then connect the plug into a power outlet.
© Copyright 2014TRENDnet. All Rights Reserved.
Configuration
1. Open a web browser, type the IP address of the Access Point and then press Enter.
The default IP address is 192.168.10.100.
2. Enter the Username and Password and click OK. By default the Username: root and
Password: root.
3. Click the Wizard button and follow the setup wizard instructions. Click Finish to
complete installation.
TEW-738APBO
8
Advertisement
Table of Contents
