Table of Contents
Advertisement
TRENDnet User's Guide
Click "Continue to this website" to access the system's WMI. The system's Overview
page will appear.
Configure System Time
System time can be configured via this page and manual setting or via a NTP server is
supported.
Please click on System -> Time Server and follow the below setting.
© Copyright 2014TRENDnet. All Rights Reserved.
•
Local Time: Display the current system time.
NTP Client: To synchronize the system time with NTP server.
•
Enable: Check to select NTP client.
o
Default NTP Server: Select the NTP Server from the drop-down list.
o
Time Zone: Select a desired time zone from the drop-down list.
o
Daylight saving time: Enable or disable Daylight saving.
o
Click Save button to save your changes. Click Reboot button to activate your changes.
Configure SNMP Setup
SNMP is an application-layer protocol that provides a message format for
communication between SNMP managers and agents. By enabling SNMP function, the
administrator can obtain the system information remotely.
Please click on System -> SNMP Setup and follow the below setting.
SNMP v2c Enable: Check to enable SNMP v2c.
•
TEW-738APBO
70
Advertisement
Table of Contents
