Tew-740Apbo #1 Configuration - TRENDnet TEW-740APBO User Manual

TRENDnet User's Guide

TEW-740APBO #1 Configuration

1. Connect the power adapter connector side to the POWER IN on the included
proprietary PoE injector and the adapter to an AC power source.
Note: EU model also include an on/off power switch. Please make sure to switch to the
(On/-) position.
2. Connect an RJ-45 Ethernet cable from the access point LAN port to the P+DATA OUT
on the included proprietary PoE injector.
3. Connect an RJ-45 Ethernet cable from the computer to the 10/100 DATA IN on the
included proprietary PoE injector.
4. The access point power LED will turn on to indicate the device is receiving power.
5. Assign a static IP address to your computer network adapter in the subnet of
192.168.10.x (ex. 192.168.10.10) and subnet mask of 255.255.255.0.
© Copyright 2016 TRENDnet. All Rights Reserved.
6. Open your web browser and type in the IP address of the access point in the address
bar, then press Enter. The default IP address of the access point is 192.168.10.100.
7. When prompted to login, enter the default user name and password and click OK.
Default User Name: admin
Default Password: admin
TEW-740APBO
9