Table of Contents
Advertisement
TRENDnet User's Guide
End at: Enter the end time of time policy
o
System Status
This section breaks down into subsections of System Overview, Associated Clients
Status, WDS Link Status, Extra Information and Event Log.
System Overview
Display detailed information of System, Network, LAN and Wireless in the System
Overview page.
•
Device Information: Display the information of the system.
Operating Mode: The mode currently in service.
o
Host Name: The name of the system.
o
Host Description: A description of the system.
o
Firmware Version: The current installed firmware version.
o
Firmware Date: The build time of installed firmware.
o
Device Time: The current time of the system.
o
System Up Time: The time period that system has been in service since last
o
reboot.
ETH1/ETH2MAC: Ethernet MAC address of the access point.
o
Wireless MAC: Wireless MAC address of the access point
o
© Copyright 2014TRENDnet. All Rights Reserved.
CPU Loading: The CPU loading of the access point
o
Memory Used: Memory usage of the access point.
o
LAN Information: Display total received and transmitted statistics on the LAN
•
interface.
Ethernet Connection Type: The connection applied on the access point.
o
IP Address: The management IP of system. By default, it's 192.168.2.254.
o
IP Netmask: The network mask. By default, it's 255.255.255.0.
o
IP Gateway: The gateway IP addresses and by default, it's 192.168.2.1.
o
Primary DNS: The primary DNS server in service.
o
•
Wireless Information: Display total received and transmitted statistics on available
Virtual AP.
WiFi: Wireless status of the access point.
o
Band: Operating wireless band of the access point.
o
Channel: Operating channel of the access point.
o
Current Tx Power: Transmit power of the access point.
o
TEW-738APBO
47
Advertisement
Table of Contents
