TRENDnet User's Guide
• DNS: Check either "No Default DNS Server" or "Specify DNS Server IP" button as
desired to set up the system DNS.
Primary: The IP address of the primary DNS server.
o
Secondary: The IP address of the secondary DNS server.
o
• 802.1d Spanning Tree
The spanning tree network protocol provides a loop free topology for a bridged LAN
between LAN interface and 4 WDS interfaces from wds0 to wds3. The Spanning
Tree Protocol, which is also referred to as STP, is defined in the IEEE Standard
802.1d. The Spanning tree always enabled on TEW-738APBO. Below Figures depict
a loop for a bridged LAN between LAN and WDS link
Click Save button to save your changes. Click Reboot button to activate your changes
© Copyright 2014TRENDnet. All Rights Reserved.
TEW-738APBO
13