Table of Contents
Advertisement
TRENDnet User's Guide
access to Access Point; All others will be denied.
o Only Deny List MAC: The wireless clients in the MAC Filter List will be denied to
access to Access Point; All others will be allowed.
MAC Address: Enter MAC address (e.g. aa:bb:cc:00:00:0a) and click "Add" button,
•
then the MAC address should display in the MAC Filter List.
There are a maximum of 20 clients allowed in this MAC Filter List. The MAC addresses of
the wireless clients can be added and removed to the list using the Add and Delete
buttons.
Click Reboot button to activate your changes
Virtual Server
"Virtual Server" can also referred to as "Port Forward" as well and used interchangeably.
Resources in the network can be exposed to the Internet users in a controlled manner
including on-line gaming, video conferencing or others via Virtual Server setup. Don't
repeat ports' usage to avoid confusion.
Suppose you want to assign ports 21-25 to one FTP, Telnet and SMTP server (A in the
example), and port 80 to another (B in the example). You assign the LAN IP addresses
and the ISP assigns the WAN IP address. The NAT network appears as a single host on
the Internet.
Virtual Server: By Default, It's "Disable". Check Enable radial button to enable
•
Virtual Server.
Description: Enter appropriate message for resource sharing via Virtual Server.
•
Private IP: Enter corresponding IP address of internal resource to share.
•
•
Protocol Type: Select appropriate sessions, TCP or UDP, from shared host via
© Copyright 2014TRENDnet. All Rights Reserved.
multiple private ports.
•
Private Port: A port or a range of ports may be specified as start:end; i.e. port
20:80
Public Port: A port or a range of ports may be specified as start:end; i.e. port 20:80
•
.Click "Add" button to add Virtual Server rule to List. Total of maximum 20 rules are
allowed in this List. All rules can be edited or removed from the List. Click Reboot button
to activate your changes.
While creating multiple Virtual Server rules, the prior rules have higher priority. The
Virtual server rules have precedence over the DMZ one while both rules exist. Example 1
and 2 demonstrate proper usage of DMZ and Virtual Server rules.
Example 1: All connections should be redirected to 192.168.2.12 while DMZ is
•
enabled. Since Virtual Server rules have precedence over the DMZ rule all
connections to TCP port 22 will be directed to TCP port 22 of 192.168.2.10 and
remaining connections to port TCP 20~80 will be redirected to port TCP 20~80 of
192.168.2.11
Example 2: All connections should be redirected to 192.168.2.12 while DMZ is
•
enabled. Since Virtual Server rules have precedence over the DMZ rule all other
connections to TCP port 20~80 will be redirected to port 20~80 of 192.168.2.11.
The rule 2 won't take effect.
Bandwidth Control
Bandwidth control allows you to control the bandwidth going through the access point.
Service: Select Enable to turn on bandwidth control through the access point.
•
Mode: Select the bandwidth control mode to use through the access point.
•
Upload: Enter the upload bandwidth speeds
•
Download: Enter the download bandwidth speeds
•
TEW-738APBO
64
Advertisement
Table of Contents
