Table of Contents
Advertisement
TRENDnet User's Guide
Create Virtual AP (VAP)
The TEW-738APBO support broadcasting multiple SSIDs, allowing the creation of Virtual
Access Points, partitioning a single physical access point into 7 logical access points, each
of which can have a different set of security, VLAN Tag(ID) and network settings. Figure
3-2 shows multiple SSIDs with different security type and VLAN settings.
Sales Network
VLA
N #1
Engineer Network
VLA
N #2
Market Network
VLA
N #3
Guest Network
VLA
N #4
Accounting Network
VLA
N #5
Multiple SSIDs with different Security Type and VLAN Tag
© Copyright 2014TRENDnet. All Rights Reserved.
SSID 1
W
E
SSID 2
WPA-
PSK/TKIP
WPA-
SSID 3
PSK/AES
WPA2-
PSK/TKIP
SSID 4
WPA2-
PSK/AES
SSID 5
Virtual AP Overview
The administrator can view all of the Virtual AP's settings via this page.
Please click on Wireless -> Virtual AP Setup and the Virtual AP Overview Page appears.
VAP: Indicate the system's Virtual AP.
•
•
MAC Address: The MAC address of the VAP Interface is displayed here. When you
enable AP and reboot system, the MAC address will display here.
ESSID: Indicate the ESSID of the respective Virtual AP
•
Status: Indicate the Status of the respective Virtual AP. The Primary AP always on.
•
Security Type: Indicate a used security type of the respective Virtual AP.
•
MAC Filter: Indicate a used MAC filter of the respective Virtual AP.
•
Edit: Click Edit button to configure Virtual AP's settings, including security type and
•
MAC Filter.
TEW-738APBO
19
Advertisement
Table of Contents
