Access Point Maintenance & Monitoring; Reset Your Access Point To Factory Defaults; Access Point Default Settings; Backup And Restore Your Access Point Configuration Settings - TRENDnet TEW-814DAP User Manual

TRENDnet User's Guide
Access Point Maintenance & Monitoring

Reset your Access Point to factory defaults

Tools > Settings Management
You may want to reset your access point to factory defaults if you are encountering
difficulties with your access point and have attempted all other troubleshooting. Before
you reset your access point to defaults, if possible, you should backup your access point
configuration first, see

"Backup and restore your access point configuration settings"

page 35.
There are two methods that can be used to reset your access point to factory defaults.
• Reset Button – Located on the rear panel of your access point, see
Hardware Features" on page 2. Use this method if you are encountering
difficulties with accessing your access point management page.
OR
• Access Point Management Page
1. Log into your access point management page (see
management page" on page 8).
2. Click on Tools and click on Settings Management.
3. Under Restore Factory Default Settings section, click Restore Default. When
prompted to confirm this action, click OK.
© Copyright 2015 TRENDnet. All Rights Reserved.
on
"Product
"Access your access point

Access Point Default Settings

Administrator User Name
Administrator Password
Access Point Default URL
Access Point IP Address
Access Point Subnet Mask
Mode
Wireless
Wireless Network Name/Encryption
Wireless Multiple SSID
Backup and restore your access point configuration settings
Tools > Settings Management
You may have added many customized settings to your access point and in the case that
you need to reset your access point to default, all your customized settings would be
lost and would require you to manually reconfigure all of your access point settings
instead of simply restoring from a backed up access point configuration file.
To backup your access point configuration:
1. Log into your access point management page (see
management page" on page 8).
2. Click on Tools and click on Settings Management.
3. Next to Save Settings section, click Save.
TEW-814DAP
admin
admin
http://tew-814dap/
192.168.10.100
255.255.255.0
Access Point
Enabled
Please refer to sticker or
device label
Disabled
"Access your access point
37