TRENDnet User's Guide
Radius Server Settings:
•
IP Address: Enter the IP address of the Authentication RADIUS server.
o
Port: By default, it's 1812. The port number used to communicate with RADIUS
o
server.
Shared secret: A secret key used between system and RADIUS server. Supports 8
o
to 64 characters.
Accounting RADIUS Server: Enable to set Account RADIUS server.
o
Key Index: key index is used to designate the WEP key during data transmission.
o
4 different WEP keys can be entered at the same time, but only one is chosen.
WEP Key #: Enter HEX or ASCII format WEP key value; the system supports up to 4
o
sets of WEP keys.
WPA-PSK (or WPA2-PSK): WPA (or WPA2) Algorithms, allows the system accessing
o
the network by using the WPA-PSK protected access.
© Copyright 2014TRENDnet. All Rights Reserved.
Bandwidth Control
Bandwidth control allows you to control the bandwidth going through the access point.
Service: Select Enable to turn on bandwidth control through the access point.
•
Mode: Select the bandwidth control mode to use through the access point.
•
•
Upload: Enter the upload bandwidth speeds
Download: Enter the download bandwidth speeds
•
Configure SNMP Setup
SNMP is an application-layer protocol that provides a message format for
communication between SNMP managers and agents. By enabling SNMP function, the
administrator can obtain the system information remotely.
Please click on System -> SNMP Setup and follow the below setting.
TEW-738APBO
45