Download
Share
Print this page
TRENDnet TEW-740APBO Quick Installation Manual
  1. Manuals
  2. Brands
  3. TRENDnet Manuals
  4. Wireless Access Point
  5. TEW-740APBO
  6. Quick installation manual

TRENDnet TEW-740APBO Quick Installation Manual

Hide thumbs Also See for TEW-740APBO:

Advertisement

Quick Links

Download this manual See also: User Manual
Quick Installation Guide
TEW-740APBO

Advertisement

loading

Related Manuals for TRENDnet TEW-740APBO

Summary of Contents for TRENDnet TEW-740APBO

  • Page 1 Quick Installation Guide TEW-740APBO...
  • Page 2 Table of Content 1 English 1. Before You Start 2. Hardware Configuration 3. Hardware Installation...

  • Page 3: Before You Start

    Phillips screwdriver (sold separately) Ÿ Note: 1. The TEW-740APBO does not support IEEE 802.3at/af. You must use the proprietary Power over Ethernet injector that is supplied with the TEW-740APBO. 2. Check package contents for waterproof kit (network cable is not included).

  • Page 4: Hardware Installation

    2. Hardware Installation Note: The default IP address of the TEW-740APBO is 192.168.10.100. To configure the TEW-740APBO, your network adapter must have an IP address within the 192.168.10.x subnet (e.g. 192.168.10.50). Please refer to the Appendix in the User's Guide for more information.
  • Page 5 2. Configure and connect the devices before mounting. Included PoE injector 1. Connect one end of a network cable into TEW-740APBO #1. 2. Connect the opposite end of the network cable to the P+DATA OUT port on the Power over Ethernet Injector.
  • Page 6 IP address within the DHCP pool of your router. In this example, we will assume the following: Router IP Address: 192.168.10.1 Subnet Mask: 255.255.255.0 DHCP Pool: 192.168.10.100~192.168.10.149 The TEW-740APBO will be setup with the following IP address assignment: TEW-740APBO #1 IP Address: 192.168.10.50 IP Netmask (Subnet Mask): 255.255.255.0 IP Gateway (Gateway IP Address): 192.168.10.1 Primary DNS: 192.168.10.1...
  • Page 7 16. Confirm connectivity between the two access points. 17. Enter the default username and password, and then click Log In. Note: For first time installation, you are required to change the admin password. User Name: admin Password: admin Note: Username and password are case sensitive. 18.
  • Page 8 22. Enter your new username and the new password, and then click Log In. 23. Click System → LAN. 24. Select Static IP. 25. Configure the IP address, IP Netmask, and IP Gateway based on the example in Phase 1: Overview.
  • Page 9 32. Enter the username and password, and then click Log In. 33. Click Wireless → WDS. Note: To protect your network from any unauthorized access it is recommended to enable wireless encryption. 34. Enter the MAC address of the other access point. The below configuration will be based on the example in Phase 1: Overview.
  • Page 10 Phase 3: Confirm Connectivity 1. Leave TEW-740APBO #2 connected to your computer. 2. Connect TEW-740APBO #1 to a LAN port of a router on your network. 3. To verify connectivity, run your computer's command prompt and ping TEW-740APBO #1's assigned IP address from your computer.
  • Page 11 3. Hardware Installation Waterproof kit installation 1. Unscrew the sealing nut from the main body. 2. Separate the rubber seal from the claw. 3. Verify that you have the following parts: Cable Gland, Seal, Claw, Sealing Nut Sealing Nut Cable Gland Seal Claw 4.
  • Page 12 6. Insert the seal into the claw. 7. Insert the seal/rubber claw into the Cable Gland. 8. Connect the Ethernet cable to the PoE port on the bottom of the TEW-740APBO.
  • Page 13 9. Fasten the plug to the housing of the TEW-740APBO. 10. Fasten the cap to the weatherproof plug.
  • Page 14 Point-to-Point (WDS Bridge) Installation...
  • Page 15 Internet Modem Router Building 1 Building 2...
  • Page 16 1. Refer to the above diagram. 2. Mount the TEW-740APBOs in your desired location. (See pole mounting the TEW-740APBO for mounting instructions). 3. Connect the TEW-740APBOs to their respective network. 4. Confirm that the TEW-740APBOs are facing each other. 5. Verify that the status LED indicators on both TEW-740APBOs are fully functional: PWR [Power] (Green / Solid), Wireless Signal Strength (Blinking / Green).

  • Page 17: Connecting The Grounding Wire

    Connecting the Grounding Wire 1. Identify the grounding hole on the outdoor access point. You will see a symbol next to the hole. 2. Align one end of the grounding wire over the hole. Then secure grounding wire with the provided screw and washer.
  • Page 18 2. Slide the two provided pole mounting clamps around the pole. Place the mounting bracket at the desired height and position. 3. Secure the TEW-740APBO to the pole mounting bracket using the mounting clamp screws. 4. Adjust the orientation of the access point as necessary.
  • Page 19 10dBi Wireless N300 Outdoor PoE Access Point Trade Name: TRENDnet TRENDnet hereby declare that the product is in compliance with the essential requirements and other relevant provisions under our sole responsibility. Safety EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 + A2: 2013 EN 301 489-1 V1.9.2: 09-2011...
  • Page 20 каждого продукта на сайте компании TRENDnet. Garantia Limitada A TRENDnet garante seus produtos contra defeitos de material e mão de obra sob condições normais de uso e serviço. Os períodos de garantia específicos estão listados em cada uma das páginas dos respectivos produtos no site da TRENDnet.
  • Page 21 Safety notes Before using your TRENDnet device for the first time, it is essential to read and understand all safety and operating instructions. Keep instructions in a safe place for future reference. Some TRENDnet products are rated for outdoor applications and can sustain certain weather conditions.
  • Page 22 Product Warranty Registration If you have any questions regarding the product Please take a moment to register your installation, please contact our Technical Support. product online. Go to TRENDnet’s website at: Toll free US/Canada: 1-866-845-3673 www.trendnet.com/register Regional phone numbers available at www.trendnet.com/support...