Table of Contents
Advertisement
TRENDnet User's Guide
Subnet mask : 255.255.255.0
Enabling UPnP in Windows XP
1.
Open the "Add/Remove Programs" control panel, and then click on "Add/Remove
Windows Components" in the sidebar. Scroll down and find "Networking Services",
highlight it, and then click Details.
© Copyright 2014TRENDnet. All Rights Reserved.
2.
In the "Networking Services" window, ensure that the "Internet Gateway Device"
and "UPnP User Interface" options are checked. If they are not, check it to enable
them, as shown below, and click OK to continue.
Appendix
76
Advertisement
Table of Contents
