Table of Contents
Advertisement
TRENDnet User's Guide
Wireless Information: Display total received and transmitted statistics on available
•
Virtual AP.
WiFi: Wireless status of the access point.
o
Band: Operating wireless band of the access point.
o
Channel: Operating channel of the access point.
o
Current Tx Power: Transmit power of the access point.
o
Data Rate: Current wireless data rate of the access point.
o
Associated Clients Status
It displays ESSID, on/off Status, Security Type, total number of wireless clients associated
with all Virtual AP.
•
VAP Information: Highlights key VAP information.
VAP: Available VAP from Primary AP to VAP6.
o
ESSID: Display name of ESSID for each VAP.
o
Status : On/Off
o
Security Type: Display chosen security type; WEP, WPA/WPA2-PSK, WPA/WPA2-
o
© Copyright 2014TRENDnet. All Rights Reserved.
Enterprise.
Clients: Display total number of wireless connections for each VAP.
o
VAP Clients: Display all associated clients on each Virtual AP.
•
MAC Address: MAC address of associated clients
o
RSSI: Signal Strength of from associated clients.
o
TX/RX Rate: Transmit and receive connection rate
o
TX/RX SEQ: Transmit and receive sequence.
o
TX/RX Bytes: Transmit and receive bytes
o
Connect Time: Connection time
o
Disconnect: Click "Disconnect" button to manually disconnect a wireless client in
o
a Virtual AP.
Show WDS Link Status
Peers MAC Address, antenna 0/1 received signal strength, phy mode and channel
bandwidth for each WDS are available.
o MAC Address: Display MAC address of WDS peer.
o RSSI: Indicate the signal strength of the respective WDS links.
TX/RX SEQ: Transmit and receive sequence.
o
TX/RX Bytes: Transmit and receive bytes
o
TEW-738APBO
24
Advertisement
Table of Contents
