HCIT left cover removal
Carefully remove the printer or multifunction printer from the high-capacity input tray (HCIT), and remove
1.
the HCIT from the caster base.
Remove the HCIT media tray assembly. See
2.
Remove the HCIT rear cover. See
3.
Remove the six screws (A) securing the HCIT left cover to the drawer.
4.
5.
Remove the HCIT left cover.
"HCIT media tray assembly removal" on page
"HCIT rear cover removal" on page
A
5026
4-191.
4-193.
A
Repair information
4-195
Previous
Next
Go Back