Lexmark C734dn Service Manual page 57
Hide thumbs
Also See for C734dn:
- User manual (216 pages) ,
- Wireless setup manual (35 pages) ,
- Connection manual (5 pages)
Table of Contents
Advertisement
Error code
Description
202.02
Exit sensor is made when printer tries
to print from an idle state.
Possible causes:
202.12
Exit sensor broke early.
Possible causes:
202.13
Exit sensor never broke.
Possible causes:
202.17
Exit sensor is made when the printer
powers up or covers are closed.
Possible causes:
202.21
Fuser motor stalled.
Possible causes:
202.31
Paper jam at exit sensor during warm-
up.
Possible causes:
• Damaged paper exit sensor or
paper exit sensor flag
• Damaged fuser autoconnect
• Faulty fuser DC cable connection
• Faulty fuser
• Faulty system board
• Damaged paper exit sensor or
paper exit sensor flag
• Faulty fuser
• Faulty system board
• Damaged paper exit sensor or
paper exit sensor flag
• Faulty fuser
• Faulty system board
• Faulty output bin flag
• Damaged paper exit sensor or
paper exit sensor flag
• Damaged fuser autoconnect
• Faulty fuser DC cable connection
• Faulty fuser
• Faulty system board
• Faulty cable/connector
• Faulty fuser motor
• Faulty system board
• Damaged paper exit sensor or
paper exit sensor flag.
• Damaged fuser autoconnect.
• Faulty fuser DC cable connection.
• Faulty fuser.
• Faulty system board.
Action
• Check for anything in the paper path that might
cause the paper to jam.
• The fuser exit sensor may not be functioning
properly. Go to
"Exit sensor service check"
on page
2-127.
The fuser exit sensor may not be functioning
properly. Go to
"Exit sensor service check" on
page
2-127.
• Check exit sensor flag on fuser for proper
operation. Ensure that paper is not hanging on
the flag.
• The fuser exit sensor may not be functioning
properly. Go to
"Exit sensor service check"
on page
2-127.
• Check for anything in the paper path that might
cause the paper to jam.
• The fuser exit sensor may not be functioning
properly. Go to
"Exit sensor service check"
on page
2-127.
• Check for anything in the paper path that might
cause the paper to jam.
• If clearing a paper jam does not fix the problem,
go to
"142.xx, 906.01–906.04—Motor (fuser)
error service check" on page
• Check for anything in the paper path that might
cause the paper to jam.
• The fuser exit sensor may not be functioning
properly. Go to
"Exit sensor service check"
on page
2-127.
Diagnostic information
5026
Previous
Next
Go Back
2-43.
2-21
Advertisement
Table of Contents
