Waste Toner Hv Contact Assembly Removal - Lexmark C734dn Service Manual

5026

Waste toner HV contact assembly removal

See
"Waste toner HV contact assembly" on page 7-11
Disconnect the transfer module cable (A).
1.
Press the two tabs (B) to release the front access door cover assembly.
2.
3. Press the two tabs (C) on either side of the transfer module, and lift out the transfer module.
Note: Leave the photoconductor units on the transport belt when removing.
Warning:To avoid damaging the photoconductor drum, hold the photoconductor units by their handle and
place the photoconductor units on a clean surface. Never expose the photoconductor units to light for a
prolonged period of time.
Remove the left cover. See
4.
Service Manual
4-176
for the part number.
B
"Left cover removal".
C
A
Previous
Next
Go Back