Lexmark C734dn Service Manual page 233

Hide thumbs Also See for C734dn:

Table of Contents

Adjust the printhead alignment screw (G) to change the skew and straighten the image on the

If the top right alignment marks are lower than the top left alignment marks, rotate the alignment

screw counterclockwise a full revolution, and print the Quick Test page. Repeat adjusting the screw

and printing the Quick Test until the top alignment marks are the same distance from the top of the

Note: One rotation of the printhead alignment screw equals approximately 0.5 millimeter movement

of the top edge print alignment marks.

When the top right and top left alignment marks are both showing and are even on the page, the

skew is aligned.

Repair information

C734n Cs736dn C734dnw C736n C736dn