5026
HCIT front tray cover removal
Note: When removing the high-capacity input tray (HCIT) front tray cover, it is not necessary to remove the
HCIT media tray assembly from the base machine and the caster base.
1.
Remove the HCIT media tray assembly. See
Remove the six screws (A) securing the HCIT front tray cover to the media tray assembly.
2.
Remove the HCIT front tray cover.
3.
Service Manual
4-192
"HCIT media tray assembly removal" on page
Previous
4-191.
Next
Go Back