Bin full sensor flag removal
Remove the top access cover assembly. See
1.
2.
Turn the top access cover over, and use a flatblade screwdriver to carefully remove the flag (A).
Bin full sensor removal
See
"Bin full sensor with cable" on page 7-3
Remove the top access cover assembly. See
1.
Turn the top access cover over, and press the side of the bin full sensor (A) to snap it loose from the cover.
2.
Remove the bin full sensor and cable.
3.
"Top access cover assembly removal" on page
for the part number.
"Top access cover assembly removal" on page
A
5026
4-40.
A
4-40.
Repair information
4-53
Previous
Next
Go Back