Step
Questions / actions
1. Replace the fuser. See
8
on page
4-104.
2. Bring the printer up in Diagnostics Menu
(turn off the printer, press and hold
. and turn on the printer).
3. Select SENSOR TESTS, and press
Select (
).
4. Select Dynamic Sensors, and press
Select (
).
5. Select Fuser Exit, and press
Select (
).
6. Open the front access door and top
access cover.
7. Activate the fuser exit sensor.
8. Did the fuser exit sensor change from
Open to Closed?
Problem resolved.
"Fuser removal"
and
Yes
Replace the system board.
See
"Fuser removal" on
page
4-104.
Diagnostic information
5026
Previous
No
Next
Go Back
2-65