Low-Voltage Power Supply (Lvps) Removal - Lexmark C734dn Service Manual

5026

Low-voltage power supply (LVPS) removal

See
"Low-voltage power supply" on page 7-7
3. Disconnect the connector at JLVPS1 connector (A) on the system board.
Remove the five LVPS mounting screws (B).
4.
Disconnect the AC fuser cable (C) from the LVPS.
5.
Service Manual
4-112
Remove the right cover. See
1.
Remove the rear frame cover. See
2.
for the part number.
"Right cover removal" on page
"Rear frame cover removal" on page
4-37.
4-33.
Previous
Next
Go Back