Fuser Ac Cable Removal - Lexmark C734dn Service Manual

Fuser AC cable removal

Note: The LVPS to fuser AC cable is black.
1. Remove the top cover assembly. See
Turn the top cover assembly over.
2.
Lift the locking latch (A) on the connector, slide the connector down, and remove the connector from the
3.
keyed hole.
Remove the cable from the cable openings (B).
4.
Note: Observe the routing of the cable for reinstallation.
"Top cover assembly removal" on page
5026
4-43.
Repair information
4-105
Previous
Next
Go Back