Operator Panel Ground Cable Assembly Removal - Lexmark C734dn Service Manual

5026

Operator panel ground cable assembly removal

Remove the top access cover assembly. See
1.
2. Remove the nine screws (A), and remove the position guide.
3. Remove the screw (B), and remove the ground cable connector.
Disconnect the ground cable (C).
4.
Disconnect the operator panel ground cable assembly (D) and the USB connector ground cable (E).
5.
Installation note: Note the routing of the cable and the cable retainers.
Service Manual
4-124
"Top access cover assembly removal" on page
Previous
4-40.
Next
Go Back